Artwork Print and Cut for AllFightSticks 14" Solid Bottom Panel

Important: Custom Orders Do Not Ship Separately

If you place an order for a personalized product along with non-custom products, such as arcade part or merchandise, please note that all products will ship together.  We ask for a minimum of 7-10 business days to process custom orders and prepare for shipping, as we often have a large queue, and personalized orders require additional processing work.  If you desire to receive your non-custom products earlier, then please place two separate orders.  This will allow the non-custom orders to ship within our normal 1-2 business days.

Please note that artwork for this Fightstick requires a plexiglass replacement. The original Fightstick panel contains artwork that is permanently attached to it, the panel was not originally designed to accomodate custom artwork, or did not come with a plexi panel. After adding custom artwork to your cart, look for the Fightstick Plexi that matches your Fighstick model.

Control panel artwork represents one of the most convenient means to personalize your fightstick, giving it a new look almost immediately. 

High Resolution, Color Fidelity

Artwork prints are developed using a top-of-the-line commercial printer, offering vivid, professional-quality artwork replication. The printer is capable of resolution of 1200dpi (dots per inch), and 8 color ink system (Cyan, Magenta, Yellow, K(Black) + Light Cyan, Light Magenta and White) reproduces artwork over a wide color range.

Artwork is printed on 10 mil cardstock sheet.  It carries 95% brightness and tensile strength of 100 pounds per inch.

Each print is laser cut to your specifications, as presented by available options.  You will receive the print with insert cutouts designed to fit your chosen brand. Gently press downward to remove the cutouts.

Important Notes about Color Fidelity, Brightness

• Please do not change the RGB color space of our templates to CYMK when submitting your artwork. Our templates are intentionally designed in the RGB color space to best match most customer's screen expectations. We will not reprint artwork whose template is changed to CYMK color space.
• Unless properly calibrated to your printer and viewing environment, your monitor does not accurately represent the brightness of paper. Artwork submissions may need adjustment to ensure prints are not too dark. Please read this helpful support article for more information

Designed for AllFighticks 14"

AllFightSticks 14" Body Solid Bottom Template (1.7Mb zip)

For those who are looking for further customization of their AFS Fightstick, or to display a complimentary illustration to their top panel artwork, the solid bottom panel artwork is a perfect choice.  This artwork is placed on the underside of your AFS Body, and secured behind the rubber feet.  A plexi cover is required to protect the artwork.

Joystick Shaft Access Option

The AFS 14" possesses a convenient 24mm opening on the opposite side. Removing this gives you access to the joystick shaft, where you can insert a flathead screwdriver to keep the shaft in place while you unscrew the balltop or battop. The artwork service gives you the option to retain this opening, or cover it, leaving the panel  

Cut Joystick Shaft Access? (Yes, Default)	Cut Joystick Shaft Access? (No)

Installation Notes

Much like the top panel, installing artwork to the bottom of the AFS body panel is fairly straightforward.

First turn the entire body upside down. You can use a soft cloth or towel to prevent scratching the metal plate or any plexi/artwork may you have on the top. On the 18" and 14.5" models, there is a separate metal panel that is held in place by the rubber feet. Use a Phillips Head screwdriver to remove the rubber feet.	In the 14" model, the bottom half contains two screw holes. These screws, along with the four rubber feet screws are used to attach the bottom panel to the top panel. Use the same screwdriver to remove the two center screws.
It is here that you can install the bottom panel plexi, artwork, or both items - starting with the paper artwork, then the plexi top. Please note that the bottom panel does have some play, allowing you to reposition the artwork and plexi a bit to align with it.  If you see that the rotation or alignment is off, simply loosen the screws and reposition the plexi.  This is especially true of the 14" model, since there is no specific panel for it.  Once the alignment is preferable, simply tighten the screws on the rubber feet. If you own the 14" model, you will also tighten the additional two screws.