Important: Custom Orders Do Not Ship Separately
If you place an order for a personalized product along with non-custom products, such as arcade part or merchandise, please note that all products will ship together. We ask for a minimum of 7-10 business days to process custom orders and prepare for shipping, as we often have a large queue, and personalized orders require additional processing work. If you desire to receive your non-custom products earlier, then please place two separate orders. This will allow the non-custom orders to ship within our normal 1-2 business days.
Please note that artwork for this Fightstick requires a plexiglass replacement
. The original Fightstick panel contains artwork that is permanently attached to it, the panel was not originally designed to accomodate custom artwork, or did not come with a plexi panel. After adding custom artwork to your cart, look for the Fightstick Plexi
that matches your Fighstick model.
Control panel artwork represents one of the most convenient means to personalize your fightstick, giving it a new look almost immediately.
High Resolution, Color Fidelity
Artwork prints are developed using a top-of-the-line commercial printer, offering vivid, professional-quality artwork replication. The printer is capable of resolution of 1200dpi (dots per inch), and 8 color ink system (Cyan, Magenta, Yellow, K(Black) + Light Cyan, Light Magenta and White) reproduces artwork over a wide color range.
Artwork is printed on 10 mil cardstock sheet. It carries 95% brightness and tensile strength of 100 pounds per inch.
Each print is laser cut to your specifications, as presented by available options. You will receive the print with insert cutouts designed to fit your chosen brand. Gently press downward to remove the cutouts.
Important Notes about Color Fidelity, Brightness
- Please do not change the RGB color space of our templates to CYMK when submitting your artwork. Our templates are intentionally designed in the RGB color space to best match most customer's screen expectations. We will not reprint artwork whose template is changed to CYMK color space.
- Unless properly calibrated to your printer and viewing environment, your monitor does not accurately represent the brightness of paper. Artwork submissions may need adjustment to ensure prints are not too dark. Please read this helpful support article for more information
Designed for AllFighticks 18" Standard Solid Bottom Panel
For those who are looking for further customization of their AFS Fightstick, or to display a complimentary illustration to their top panel artwork, the solid bottom panel artwork is a perfect choice. This artwork is placed on the underside of your AFS Body, and secured behind the rubber feet. A plexi cover is required to protect the artwork.
Much like the top panel, installing artwork to the bottom of the AFS body panel is fairly straightforward.
|First turn the entire body upside down. You can use a soft cloth or towel to prevent scratching the metal plate or any plexi/artwork may you have on the top. On the 18" and 14.5" models, there is a separate metal panel that is held in place by the rubber feet. Use a Phillips Head screwdriver to remove the rubber feet.
||In the 14" model, the bottom half contains two screw holes. These screws, along with the four rubber feet screws are used to attach the bottom panel to the top panel. Use the same screwdriver to remove the two center screws.
|It is here that you can install the bottom panel plexi, artwork, or both items - starting with the paper artwork, then the plexi top.
Please note that the bottom panel does have some play, allowing you to reposition the artwork and plexi a bit to align with it. If you see that the rotation or alignment is off, simply loosen the screws and reposition the plexi. This is especially true of the 14" model, since there is no specific panel for it. Once the alignment is preferable, simply tighten the screws on the rubber feet. If you own the 14" model, you will also tighten the additional two screws.
If you would like to use a free, online Photoshop-like app to check out whether your artwork will work with a layout we offer, I highly recommend Photopea This amazing app works with our PSD templates and is a great way to preview your artwork or create new art files. It also exports to PSD, which is the format we recommend for submitting artwork.
New to FA Plexworks?
Click the "Options" tab for a detailed explanation of each customization option available to you. Using a mobile device? Click here to scroll to the descriptions.
We offer a photoshop template for each custom artwork or custom plexi etch. Click the "Description" tab (or scroll up if on mobile device) to display the template and download. You can also click here to access our repository and download artwork and etch templates (in Photoshop PSD format) for your desired model and others.
Important: Using templates outside of the ones we provide may produce unwanted output. We are not responsible for output generated from unsupported templates. More information here.
Warranty and Support for FA Plexworks Custom Order
Custom orders cannot be returned for refund, or exchanged for another custom order. Orders damaged upon arrival are subject to special terms within our return policy. Please see our FA Plexworks FAQ for more information about our Plexworks return policy and related Q&A.
If you have not used our Plexworks custom services before, we recommend that you visit our support section for updated information, helpful tips, and resources to get the best output.
Some useful sections to review before making your purchase (will open in new browser window or tab):