- Category
- What's New?
- FightSticks/Pads
- Joysticks
- Pushbuttons
- Spare Parts & Tools
- Hardware & PCB
- Electrical
- Customize
- Merchandise
- Sales & Clearance
- Brand
ORDER FULFILLMENT TIME EXTENDED [ INFO ]
An explanation and remedy measures from our team.
Due to differences in connection design, the PC Engine connector on this device is incompatible with the Turbografx 16, and will require an adapter cable. The US Turbo Duo is compatible with the super converter, as well as EU's Core Grafx and Japan's Supergrafx.
Taiwanese company Brook has offered a console generation of gamers the opportunity to use their PS3, PS4 and Nintendo Switch gamepads, arcade sticks, and other peripherals on modern hardware they weren't designed for. Their SuperConverter series goes retro, heading to the Genesis/Megadrive and PC Engine as a combo, giving you the opportunity to play on real hardware!
MD Pad-3B | MD Pad-6B | PCE Pad-2B | PCE Pad-6B | PC Pad-XID | PS4 Pad | PS3 Pad |
Dpad | Dpad | Dpad | Dpad | Dpad | Dpad | Dpad |
A | II–1 | III | A | ╳ | ╳ | |
C | B | I-1 | II | B | ○ | ○ |
A | X | II–3 | IV | X | □ | □ |
B | Y | I-3 | V | Y | △ | △ |
Start | Start | RUN | RUN | Start | OPTIONS | Start |
mode | SELECT | SELECT | Select | SHARE | Select | |
DPad (L/R) | DPad (L/R) | DPad (L/R) | DPad (L/R) | Lx | Lx | Lx |
DPad (U/D) | DPad (U/D) | DPad (U/D) | DPad (U/D) | Ly | Ly | Ly |
Ry | Ry | Ry | ||||
Rx | Rx | Rx | ||||
Z | RUN | VI | L1 | L1 | L1 | |
Z | SELECT | VI | R1 | R1 | R1 | |
C | II–2 | I | L2 | L2 | L2 | |
C | I-2 | I | R2 | R2 | R2 | |
L3 | L3 | L3 | ||||
R3 | R3 | R3 | ||||
XBOX | PS Key | PS Key | ||||
TP |
I-2 & II-2 : Low speed turbo
I-3 & II-3 : High speed turbo
MD Pad-3B | MD Pad-6B | PCE Pad-2B | PCE Pad-6B | PC Pad-XID | SW Pro Pad | Hori Real Arcade Pro V For SW |
Dpad | Dpad | Dpad | Dpad | Dpad | Dpad | Dpad |
A | II–1 | III | A | B | B | |
C | B | I-1 | II | B | A | A |
A | X | II–3 | IV | X | Y | Y |
B | Y | I-3 | V | Y | X | X |
Start | Start | RUN | RUN | Start | + | + |
mode | SELECT | SELECT | Select | - | - | |
DPad (L/R) | DPad (L/R) | DPad (L/R) | DPad (L/R) | Lx | Lx | Lx |
DPad (U/D) | DPad (U/D) | DPad (U/D) | DPad (U/D) | Ly | Ly | Ly |
Ry | Rx | Rx | ||||
Rx | Ry | Ry | ||||
Z | RUN | VI | L1 | L | L | |
Z | SELECT | VI | R1 | R | R | |
C | II–2 | I | L2 | ZL | ZL | |
C | I-2 | I | R2 | ZL | ZL | |
L3 | LTSB | LTSB | ||||
R3 | RTSB | RTSB | ||||
XBOX | Home | Home | ||||
Capture | Capture |
I-2 & II-2 : Low speed turbo
I-3 & II-3 : High speed turbo
Support |
DisclaimerEach Brook Controller Adapter can only handle one PS3/PS4 controller at a time. PS3/PS4 controllers connect to the Controller Adapter automatically, but must be connected with a USB cable at first time use for the purpose of registering the controller. FirmwareSwitch Compatibility is added via firmware update 1.4. Please visit here for the latest firmware and update instructions. Instructions for Wireless PS3/PS4/Switch ControlPlug in to Mega drive/PC Engine:
After pairing with the SuperConverter:
Turbo SettingTurbo function available buttons:╳、○、□、△、L1、R1、L2、R2、L3、R3. In the following description, these buttons are referred as FB, the controller will vibrate when setting: Step 1. Enter the Turbo Setting Mode: Press Share & PS Key. Step 2. Choose FB:(EX: ╳ to set turbo function) Hold down Share, then press ╳. Step 3. Complete the Turbo Setting Mode: Release all buttons then press Option. The controller will vibrate once strongly. To set another button, repeat Step 2. Step 4. Exit the Turbo Setting Mode: Press PS Key to save the settings and exit setting mode. If it’s not set successfully, please check step 3. Cancel all Turbo SettingsAfter entering the turbo setting mode by pressing the Share & PS key, press and hold Share + Option, then press the PS Key to clear all settings. This will clear all turbo settings, but will not affect the remap settings. When all settings are canceled, the controller will vibrate three times strongly. Remap SettingRemap function available buttons:╳、○、□、△、Up、Down、Left、Right、L1、R1、L2、R2、L3、R3. In the following description, these buttons are referred as FB, the controller will vibrate when setting: Step 1. Enter the Remap Setting Mode: Press Option & PS Key. Step 2. Choose FB: (EX: △ to do ╳+○ function) Press △. Step 3. Choose Remap button: Hold down Share, then press ╳+○. Step 4. Complete the Remap Setting Mode:: Release all buttons then press Option. To set another button, repeat Step 2 to 4. Step 5. Exit the Remap Setting Mode: Press PS Key to save the settings and exit setting mode. If it’s not set successfully, please check step 4. Cancel all Remap SettingsAfter entering the Remap Setting Mode by pressing the Option & PS key, press and hold Share + Option, then press the PS Key to clear all settings. This will clear all remap settings, but will not affect the turbo settings. When all settings are canceled, the controller will vibrate three times strongly. Fightstick CompatibilityThe list below indicates the controllers/sticks/wheels that have been tested to be compatible or not compatible with the converter. if your model is not listed, it does not mean that it is incompatible, rather it was not yet tested by Brook. Hori
MadCatz
Qanba
Razer
Sony
Zeroplus Taiwan (manufacturer of licensed gamepads)
Other
|
Before purchasing, please read our Electronic PCB Defect Return store policy.