Screws for SPDT Faceplate - Silver

These 4-40, 3/8" (9.25mm) long pan head screws are for use with the Acrylic Faceplate for SPDT Switch. The acrylic faceplate attaches to the back of an AllFightSticks steel enclosure, using one or more of its three available Neutrik ports. When wired to most Brook control PCBs, the SPDT switch can be used as a convenient tournament lockout feature, or allow for Left Stick, Right Stick, or digital pad control.

Internal and External Installation with AllFightstick Steel Enclosures

The acrylic faceplate allows you to install the 20mm SPDT switch either internally or externally on an AllFightsticks enclosure.  You will remove the existing 4-40 screws installed into the AFS's neutrik ports in back of the case, then replace them with the pan head screws. You can utilize the nuts and washers that came with the neutrik ports.