BNB Fightstick Gen 2 and 3 Clear/Black Matte Plexi Replacement Panel - 6GAWD Joystick 30mm Layout

Please note that BNB Gen 2 and Gen 3 panels are not compatible with Gen 1. The top and supporting panels of Gen 2 and 3 have a smooth corner, which differs from the sharper corners of the previous generation.  Additionally the supporting panel and side panels contains a second tab, which is incompatible with Gen 1.  We will continue to support replacement panels, sides, and artwork services for BNB Fightstick Gen 1 models.

Gen 2 panels will now ship with a slimmer 3mm top panel for snaputton compatibility. Gen 3 top and support panels are compatible with Gen 2, and vice versa.

The top two panels of the BNB Black/Clear Matte Plexi Fightstick consist of the control panel and supporting panel. The clear control panel provides installation for pushbuttons and will protect and display custom printed artwork. The supporting black panel contains the joystick mount (as applicable to the layout) and mount for PCB. It also contains an open space for the pushbuttons, shaped to the button configuration. Both are .177" (4.49mm) thick, and possess contour screw holes for use with Set of 8 Bolts for BNB Fightsticks and Set of 2 Bolts and Nuts for BNB Fightsticks PCB Mount.

Slimmer Top or Bottom Panel. Backwards Compatible with BNB Generation 2

The BNB Generation 3 top and bottom panel uses a slimmer 3mm acrylic surface, allowing for easier install of popular snapbuttons. The sub panels that rest between them are a thicker .177" (4.9mm), offering sturdy support. Both top and sub panels are backwards compatible, installing on earlier Gen 2 models without issue.

Matte Texture on One Side

The Black Matte BnB is designed for those who love its sleek presentation. It's important to note that the acrylic material that we cut offers a matte texture on one side, and gloss texture on the opposite side.

Currently, we are offering the matte texture facing outward, as customers for BNB Gen 2 complained of fingerprints from the gloss side when it faced outward. Black Matte is slghtly brighter so it will not directly match all solid black accessories, which tend to have a glossy texture.Please refer to the photos below for comparison between gloss and matte texture.

Gloss Texture	Matte Texture

Please note that the opposite side of this plexi will have a black gloss.

Pre-Wrapped in Paper or Film Backing

The panels are cut from acrylic sheets with protective brown paper or blue plastic film.  You may see scratches or wear on the paper or film as the sheets are cut and transported from the acrylic manufacturer to us, and should not appear on the plexiglass once removed.  To remove the film, use a fingernail on any available corner and proceed to pull away at the backing. The paper or film does not have adhesive and should not leave residue on the plexiglass.

BNB Assembled Dimensions

Here are the Width x Length x Height dimensions of an assembled BNB Fightstick: