Sanwa JLX TPML-MA Adjustable Silent Leaf Microswitch PCB Assembly

Often the PCB is the first to go out on the SANWA JLX-TPML-8YT-SK Adjustable Silent Leaf Microswitch Joystick joystick lever in a few years.  Restore it to brand new by getting the Sanwa JLX TPML-MA PCB. This hardware replaces the entire set of microswitches and PCB, and housed in very easy to install module.

The Sanwa TPML represents a first in mechanical input tech from the company, with a a five point adjustable setting directly on the microswitch. This allows you to modify the engagement speed to your preference for each direction. The TPML is also a silent operator, using  specialized Sanwa MLS-57AU leaf microswitches.

Also compatible with Sanwa JLX-TP-8YT Joystick and JLX-TP-8Y-SK Joystick (No Plate Installed) but Requires Minimum 16.2mm Actuator

Please note that if you intend to purchase the TPML PCB for use with JLX-TP-8YT Joystick and JLX-TP-8Y-SK Joystick, you must have the JLF P-W 16.2mm actuator or larger. You can bundle with the purchase of the TPML.

The Sanwa JLF P-W Actuator from the brands' JL-C line rounds out the list of improvements in the JLX. The JLF P-W Actuator is 16.2mm wide at the base - just over .4mm wider than the original Sanwa JLF actuator at 15.8mm. This is the same actuator used in the silent JLF-TPRG-8BYT-SK. It has higher dimensional stability in molding than the conventional black actuator and reduces variations in input accuracy. It is also it is about 0.12mm thicker (0.24mm in diameter) than the black actuator, but it was adopted because of its good usability by location tests and e-sports gamers.

Actuator Specs

Below is a visual of available actuators for Sanwa JLF. The original JLF actuator has a 15.8mm diameter. Following this are actuators of increasing diameter. Use this to experiment with your preferred engagement sensitivity.

Features

• Five point adjustable setting directly on the microswitch.
• Modify the engagement speed for each direction to your preference.
• MLS-57AU leaf microswitch is mostly silent.

Not Compatible with the Sanwa JLF-TP-8YT or JLF-TP-8Y-SK

Please note that this PCB is designed for the newer JLX Series of joystick levers.  If you're looking for a replacement for JLF Series, please choose Sanwa TP-MA PCB Assembly.