Neutrik NAUSB-W-B A/B USB Feed-Through - Black

Important: Instructions to Reverse A/B Ports Linked Below

The NAUSB ports are reversible. By default, Neutrik has the B port on the inside, and the A port on the outside. The FGC typically has these ports reversed. Please read our support article  for detailed instructions on how to reverse the ports.

The Neutrik NAUSB-W A/B USB Feed-Through is an essential component for your DIY joystick or multi-console PCB modifications.  The A/B adapter allows you to put a USB port outside of your case, attaching a USB cord to the console through one side, and a USB forwarding cable to your main PCB. Best of all, the USB "A" and USB "B" sides are reversible.  This means that you can choose which port is on the inside or outside of the case.

Neutrik NAUSB Dimensions, Screws included free of charge

The NAUSB doesn't usually come with mounting screws from the manufacturer.  Now, with every Neutrik USB purchase you will receive 4-40 Machine Screw and 4-40 Nut (Set of 2) free of charge.  Use them to install your NAUSB into a wood or plastic case.  For those looking to fit this component into their joystick, please refer to the schematic drawing: