.187 to 5-pin Conversion Harness

Write A Review

1. It works but..

   I originally wanted to use a Shurinken PCB on my Victrix profs 12 but the panel didn't closed. It was a good thing I ordered the .187 to 5 pin conversion harness when I bought the knee lever here at Focus attack. I would rate it higher if it was a bit longer as I had to connect it to the lever before installing it to the fightstick case and had to use an extension to connect to the Fs PCB. Jesus Flores on Apr 21st 2024

2. awewsome produtcs

   This item is required if your are using a tayung fanta stick in an etokki. Unknown on Feb 1st 2024

3. Works as described

   I used this product to install a happ joystick into my Arcade 1up Streetfighter cab. The Happ joystick was also purchased from this site. Product works as described. You do have to make sure the wiring is in its correct place or it will not work. Unknown on Sep 17th 2023

4. Exactly what I needed for Happ Joysticks

   I have a Mortal Kombat 30th anniversary edition arcade1up and wanted to install Happ Joysticks in it. Those are the original sticks used in all MK cabs in the 90's. I originally decided to replace the stock arcade1up sticks with Genuine Sanwa's, which came with a custom 5 pin female connector which was custom made for arcade1up hookups on one end and the other was 5 pin for Sanwa. Since I already had this I got the idea to get this .187 to 5 pin conversion harness to hook to the Sanwa Harness for ease and convenience. The end of this harness is male and hooks perfectly to the Sanwa Harness. This worked absolutely perfect! The only problem I had was the wiring diagram on here is for something other than what I used it for. The colors on this harness line up exactly with the colors on the Sanwa harness. After I figured out which wire is for which direction it was incredibly easy. Shipping was also pretty fast. Thanks Focus Attack! Roger G on Sep 9th 2023

5. Fastest processing for arcade parts

   Building an arcade stick, and had to order a few parts from different Sites/distributors. No one beats Focus Attack on processing and shipping. I will be buying from here for anything else I need Nicholas R on Mar 3rd 2023

6. Just what I needed for Sunzo Happ Competition sticks

   worked nicely with
   PS3/PC Zero Delay USB Encoder PCB: American Style Controls
   and
   Spare 5-Pin Female Harness for Zero Delay USB Encoder PCB
   
   Great mod on my A1up SF2 TheDadDan on Mar 2nd 2021

7. Perfect fit in hori rap 4

   Perfect fit ossamah durrani on Nov 11th 2020

8. Two stars because it works

   Update from FA: Please review photos for installation, as the ground wire is sized to wrap around the lever. From reviews, we have not received installation issues from the QCDs, but will monitor reports from future purchases.
   ---
   The ground wire is too short and the quick disconnects need to be pried open with a flathead in order to be removed. The "latch" on them is not enough to release the quick disconnect. I recommend you start following Etokki's standard on quick disconnects. Unknown on Oct 4th 2020

9. Perfect

   Working perfectly Romualdo S Silva on Sep 10th 2020

10. A+ Brethren

    Made joystick install a beautiful dream smooth as a Sunday morning Hallelujah Unknown on Jan 16th 2020