Blank Non-Slip Foam Pad for Mayflash F300

Important: Black Foam Pad Textured Appearance Will Vary Due to Friction

Foam pads are slightly porous, creating a unique texture that when scratched or rubbed, will appear lighter than the base foam color. You may notice this upon opening the packaging, or using it on a table or lap.  This is normal, and will not affect its function.

A foam pad is a great choice for those who enjoy playing fighting games with an arcade stick on their lap, or on a flat surface such as a table. Now, you can get an attractive custom etch and cut for your favorite Fightstick model.

Non-Slip Surface

The pad is made of a synthetic rubber foam, custom cut to shape with a strong adhesive backing, and attaches to the underside of your Fightstick. Lap players will appreciate the extra padding offered here as it removes the feeling of cold steel or plastic on one's legs. Additionally, the foam is designed to add friction when moved, allowing the Fightstick to largely remain in place when playing on a tabletop.

Designed for Venom Arcade, Mayflash F300, F300 Elite, Venom Multi-Format and 8Bitdo N30 Arcade

The Mayflash F300 design is used across a variety of models and brands, such as the Venom Arcade Fightstick, F500 Elite, 8BitDo FC30 Arcade, and older variants. This is not compatible with the larger Mayflash F500, Venom PS4, or 8BitDo FC30 Arcade. A foam pad is available for those models.

Installation

Please note: You do not need to remove the original screws on the bottom of the metal panel.

This model already has four rubber feet positioned on each corner of the bottom metal plate.  These rubber feet are held in place using a very strong adhesive.  To remove them, we recommend using a combination of a heat blower or hair blow dryer and and a scraper tool. It will take some effort to remove them.

You may have adhesive residue after peeling the rubber feet from the metal base, as seen in the photo above. To address this, apply rubbing alcohol, isopropyl, or solvent adhesive-removal products such as Goo-Gone™  onto each of the corners and let soak for 15-30 minutes. Use a plastic scraper to lift the remaining residue, then dry using a paper cloth. 

The foam is sized to the edges of this Fightstick model.

1. Before removing the adhesive liner, it is recommended that you perform a test-alignment of the pad onto your Fightstick. This allows you to ensure that any screw holes center reasonably with the foam's holes.
2. When you have confirmed position with liner on, first peel off the liner and lightly place the foam pad - adhesive side down - onto the surface. Lightly positioning will give you an opportunity to adjust slightly in case the alignment needs correction.
3. Once you are satisfied with the alignment, press firmly across the padding to allow the adhesive to set.

Foam Pad Orientation

The Mayflash F300 has what may appear as equidistant screw holes that would allow installation in multiple orientations.  However our experience installing the pad did not present this opportunity.  Each pad has a small arrow indicating bottom right of the foam pad. Use this to orient your install correctly.

Need Help?

If you are unfamiliar with foam pads and the options available to you, click the "Options Guide" tab, or scroll further if you are on a mobile device.

Options Guide

Thin or Thick Padding For specific models, you can choose a narrower 2 millimeter (0.78 inch) pad, or cushiony 4 millimeter (0.157 inch) pad. A thinner 2mm pad is suitable for those who desire a lower profile or playing on a flat surface such as a table.  The thicker 4mm is great for those playing on a lap, given the extra padding. Choose your Color to Match or Enhance We currently offer custom foam pads in these colors.